Samsung Xpress M262x Series User Manual page 70

Understanding the LED
6
Status LED
Status
Off
Green
(Status LED)
Red
Orange
a. When the imaging unit has reached its end of life, the machine will stop printing. In this case, you can choose to stop or continue printing from the SyncThru™Web Service ( Settings > Machine
Settings > System > Setup > Supplies Management > Imaging Unit Stop) or Samsung Easy Printer Manager (Device Settings > System > Supplies Management > Imaging Unit Stop).
Turning off this option and continuing to print may damage the device's system.
• The machine is off-line.
• The machine is in power save mode.
• When the backlight slowly blinks, the machine is receiving data from the computer.
Blinking
• When the backlight blinks rapidly, the machine is printing data.
On
• The machine is on-line and can be used.
A minor error has occurred and the machine is waiting for the error to be cleared. When the problem is cleared, the
Blinking
machine resumes.
• The cover is opened. Close the cover.
• There is no paper in the tray when receiving or printing data. Load paper in the tray.
• The machine has stopped due to a major error. Reboot the power and try the printing job again. If the problem
On
persists, please call for service.
• An imaging unit has almost reached its estimated cartridge life
"Replacing the imaging unit" on page 53).
Blinking Upgrading firmware.
On A paper jam has occurred (see "Clearing paper jams" on page 61).
Description
a
. It is recommended to replace the imaging unit (see
70
4. Troubleshooting