RECARO Performance RIDE Instruction Manual page 42

10. Check the tightness of the latch strap and retighten if
needed. This strap may become loose when the top tether
strap is tightened.
Recheck that both the latch strap and the top tether strap
are tight and properly secured.
11. To remove the LATCH connectors from the vehicle, first
loosen the adjuster by pressing the adjuster button and
lengthening the strap. Press the red buttons on the LATCH
connectors and remove from vehicle lower anchors.
12. To remove the top tether, press the release button and pull
the strap. It may be necessary to press the top of the child
restraint into the vehicle seat back to loosen the tether
adjuster. Unhook the top tether anchor from the vehicle
attachment.
13. Fold the top tether strap and place it in the storage pouch
when not in use. Place the LATCH connectors in their
storage locations when not in use.
40