P/T Setting; Pan/Tilt Limit; Area Setting - Samsung SPU-3750T User Manual

Functional Description

P/T Setting

16. Pan/Tilt Limit

▶ Main Menu/P/T Setting/Pan/Tilt Limit
The moving ranges in the Pan/Tilt directions can be limited.
Main Menu
① Camera Setting
Position :
② Sequence Setting
Selecting the Position menu brings up the following screen
③ P/T Setting
if it is for the Pan Limit setting. Move the joystick left and
④ OSD Setting
right to select a movement range from the starting point to
⑤ Alarm Setting
the end.
⑥ Initialize
 Status
Start Limit
➡
P/T Setting
① Pan/Tilt Limit

② Area Setting

Enter: Set
③ Area Masking
 Prop. P/T ON
The following picture shows the Tilt Limit setting.
 Digital Flip ON
 Image Hold Move the joystick left and right to select a movement
OFF
⑦ Auto Track1 range from the starting point to the end.
⑧ Auto Track2
➡
Start Limit
Pan/Tilt Limit
① Pan Limit
② Tilt Limit
➡
Enter: Set
Pan Limit
On/Off :
① Position
Cancels or activates the Pan/Tilt Limit functions.
② ON/OFF OFF
68
SPEED DOME CAMERA
End Limit
⇨
ESC: Exit
Enter: Set ESC: Exit
End Limit
⇨
ESC: Exit
Enter: Set ESC: Exit
User's Manual
Functional Description
17. Area Setting
▶ Main Menu/P/T Setting/Area Setting
The Area Setting menu enables selecting certain locations in
Main Menu
the course of the Pan and Tilt operation, and then display the
① Camera Setting
areas with the OSD (On Screen Display) texts when the camera
② Sequence Setting
passes through them. Up to 8 areas can be selected.
③ P/T Setting
④ OSD Setting
Area Name :
⑤ Alarm Setting
You can add names to selected areas. Names can be up to
⑥ Initialize
12 characters and can be entered via the joystick and the
 Status
Enter key. Once a name is entered, use the joystick and the
➡
Enter key to perform the Set command and save the name.
P/T Setting
① Pan/Tilt Limit
② Area Setting
③ Area Masking
 Prop. P/T
ON
 Digital Flip ON
 Image Hold OFF
⑦ Auto Track1
⑧ Auto Track2
➡
Position :
As shown in the picture below, move the joystick to select
Area Setting
the upper left corner and lower right corner of an area.
① Area 1
② Area 2
Start Position
③ Area 3
④ Area 4
....
➡
Area 1
Enter: Set
 Area Name
 Position
On/Off :
 ON/OFF
OFF
Cancels or activates the display function of selected areas.
SPEED DOME CAMERA
Area Name 001[ ]
0123456789()[]#&%/~-=_
ABCDEFGHIJKLMNOPQRSTUVWXYZ
abcdefghijklmnopqrstuvwxyz
äöÖüÄÜàâçéèêëîïôûôùÿñÑáí
óúÀÂÇÉÈÊËïïÔߌæÑÛÙŸÁÍÓÚÂ
ABC->中文1 BACK SPACE CLR SET
End Position
⇨
ESC: Exit Enter: Set ESC: Exit
69
User's Manual