Changing The Decorative Front Panel - A.O. Smith HSE-SBS-006 User Manual

Changing the Decorative Front Panel

For HSE-SBS-006 and HSE-SBS-010 models
Please follow the instructions as shown in (Fig. 28).
Figure 28
1. Pull out the Knob.
For HSE-SBS-015 and HSE-SBS-025 models
Please follow the instructions as shown in (Fig. 29).
Figure 29
1. Remove the cap using
the flat screw driver.
Please ensure to switch off the power supply while changing the Decorative Front
Panel and pull out the power plug from the socket.
An insulation layer is provided below the front panel which should not be replaced.
While changing the front panel ensure that, none of the internal components are
damaged or removed.
2. Unscrew the screw on the
Decorative Front Panel.
2. Unscrew the screw on the
Decorative Front Panel.
WARNING
16
3. Remove the Decorative
Front Panel to change.
3. Remove the Decorative
Front Panel to change.