Table of Contents
Advertisement
Getting Your Device Ready for Use
Installing the SIM Card and Battery
1. Lift the latch handle of the battery cover
and turn it counterclockwise to the unlock
(vertical) position. Then, detach the cover
from the device.
2. If you model has the phone function, you
need to install the SIM card provided by
your mobile operator. With the SIM card's
chip side facing up and the beveled corner
pointing to the slot, insert the card all the
way into the slot.
NOTE: To remove the SIM card, slightly
push in the card to release it and then
pull the card out of the slot.
3. To install the battery, attach the bottom
side of the battery to the compartment at
an angle and then lower the upper side to
engage the connector.
4. Attach the bottom side of the battery cover
to the device at an angle and then, with
the handle still in the unlock (vertical)
position, fit the latch handle into place.
Secure the latch by turning it clockwise to
the lock (horizontal) position.
Advertisement
Table of Contents
