Using Options
Using an SD Card
1. Remove the rubber protection cap by unfastening two screws.
2. Insert the card into the slot, with the connector pointing to the slot and its
label facing the back of the device.
3. Replace the cap and secure with the two screws. The cap is required for
the waterproof capability of your device.
NOTE: A taller cap is available as an option for
protecting an SDIO card which is larger.
Using the Hand Strap
You can attach the hand strap
to your device.
Please go to www.handheldgroup.com/qsg to download this guide in the following languages:
www.handheldgroup.com