Firmware Upgrade - DEGEN DE1128 Operation Manual

FIRMWARE UPGRADE

FIRMWARE UPGRADE
Before upgrade, please remove or copy the files in the unit
to save place.
1. Download the upgraded firmware from our website to a
computer. (http://www.degen.com.cn)
2. Use the provided USB cable to connect both unit and
computer, then transfer the data to the unit.
3. Disconnect the USB cable, then turn on the unit and
select [Firmware Upgrade] in Sys Set mode.
4. Press the Tuning Knob and select [Local Folder] to enter
firmware upgrade software. [Updating, please wait!]
appears on the display.
5. The unit will turn on automatically after [Updating
Success!] appears on the display.
If the unit can not be turned on, please use a computer to
upgrade by the following steps:
1. Download the ungraded firmware from our website to a
computer.
2. Open [Burn Tool] under the DE1128 Firmware Upgrade
Folder. The below program appears on the screen:
32