Directly Input Frequency; Storing Stations Manually; Listening To Stored Memory - DEGEN DE1128 Operation Manual

TUNE IN STATIONS

DIRECTLY INPUT FREQUENCY

In Radio Mode,
corresponds to a station's frequency, and then press <
button to directly enter.
Note: When listening to <m> bands, it is invalid if your input
is out of the frequency range.

STORING STATIONS MANUALLY

Select your desired station, press the tuning knob or the
< > button and rotate the Tuning Knob to select <Save>,
then rotate the Tuning Knob or the <
to select memory location from 1~50 in FM/SW mode or
1~25 in AM mode. Press the Tuning Knob again to confirm.
Memory Locations:
FM/SW(manual storage): M1 ~ M50
AM(manual storage): M1 ~ M25
LISTENING TO STORED MEMORIES
1. After storing stations into memory, press the <
button with the memory address M01~M99 shown on the
display(next to the frequency) to select your desired station
memory.
2. In radio mode, press the number on the keypad that
corresponds to a station's memory number, then press
the < > button to enter the stored station.
12
press the number on the keypad that
>,< > button
> or <
>
>