Power Off Mode; Contrast Setting; Memory Info - DEGEN DE1128 Operation Manual

POWER OFF MODE

POWER OFF MODE
Select [Power Off] in Sys Set mode, press the Tuning Knob
to enter and rotate the Tuning Knob to enter the below
settings:
Standby mode: After turn off the unit, you can check time by
Sleep mode: After turn off the unit, only the <

CONTRAST SETTING

Select [Contrast] in Sys Set mode and press the Tuning Knob
to enter. The brightness level 0~16 appears on the display,
rotate the Tuning Knob to adjust, and then press the Tuning
Knob to confirm and exit.

MEMORY INFO

Select [Memory Info] in Sys Set mode and press the
Tuning Knob to display the memory status. Press the
< >, <
of the unit or the SD card.
30
press any button.
works. This mode can save more electricity.
> can shift checking the memory status
> button