Mp3 Operation - Hyundai H-1419 Instruction Manual

MP3 operation

• Press ON/OFF key once to switch on the system power
• Press CD key to enter CD mode.
• Open the CD door. Put a MP3 disk into the CD compartment and close the CD door.
• The disk will spin and perform a full check of the disc to count the total number of songs. Then playback of the first song (track) will begin and the
display will indicate the current track no: (001). On the display "MP3" symbol will appear to indicate that MP3-CD is playing.
• Press the NEXT/TUNE UP button once to skip to the next track. Press and hold this button to search for a particular point at high speed forward. Release
the button to resume normal play.
• Press the BACK/TUNE DOWN button once to the beginning of the current track. Press the BACK/TUNE DOWN button twice to skip back to previous
track. Press and hold this button to search for a particular point at high speed backward. Release the button resume normal play.
• You can use the +10/MEM + key to jump 10 songs ahead or -10/ MEM - key to jump 10 songs backward. This is useful if you have many songs on you
want to quickly jump to a particular song.
• Press +10/MEM + key or -10/MEM - key several times until you reach a song number near to your desired song, and then press BACK/TUNE DOWN
or NEXT/TUNE UP repeatedly to arrive and the exact song you desire.
• If your MP3-CD has folders, you can select the folder to playback. Press FOLDER/FM-MODE (FM mono/stereo) key to switch to the next folder. The
set will start playing the first song in the next folder.
• If the set is in "STOP" mode and you press FOLDER/FM-MODE (FM mono/stereo) key, the unit will switch to the next folder but the playback will not
start automatically. Press PLAY/PAUSE button to start playback.
Note: Good quality sound is guaranteed only when playing licensed MP3 discs.
Text dispay mode (ID3-tag)
• The set can display the text information (ID3-tags) of MP3 files on the LCD.
• During playback of an MP3 file approximately every 5 seconds the display will automatically switch to text mode and display ID3-tag information.
• After the ID3-tag information has been displayed the unit will switch back to the normal display (track # and palyback time) for about another 5 seconds.
• This sequence will repeat continuously as follows: Track number + playback time display (about 5 seconds) => ID3-tags (text display).
USB flash drive/ SD-card operations
•
This unit is equipped with a USB socket which can accept and play MP3 files stored on standard USB flash (compatible with usb version 1.1 & 2.0).
•
This unit is also equipped with an SD card socket which can accept and play MP3 files stored on standard SD cards.
•
To use USB drives/ SD cards for MP3 playback insert the USB drive or SD card into the appropriate socket and press the USB/ SD key (once for USB
and twice for SD card).
•
The display will show "USB" or "SD" (depending on which one you are using) symbol.
•
If MP3 files are found the set will start playback of the first file.
•
Playback control is same as for MP3-CD discs.
7