Table of Contents
Advertisement
Available languages
Available languages
Important safeguards
• ATTENTION: The owner's manual contains important operating and maintenance instructions. For your safety, it is necessary to refer to the manual.
• DANGEROUS VOLTAGE: Uninsulated dangerous voltage that may be of sufficient magnitude to constitute a risk of electrical shock to persons is
present within this product enclosure.
• CAUTION: To reduce the risk of electric shock, do not remove cover (or back). Prefer servicing to qualified service personnel.
Power supply
Battery operation
• Open the battery compartment cover
• Insert 6 batteries (UM-2/LR14). Please observe correct battery polarities or the set will not work.
• Close the battery compartment cover.
AC operation
• Before the first connecting of the appliance check that voltage indicated on the rating label corresponds the mains voltage in your home.
• The AC cord is located inside the battery compartment. Connect it to the unit.
• Insert the plug into power supply.
CAUTION:
• When the set is only used with AC or is not used for 4 weeks or more, please remove the batteries, to avoid damage to the set from leakage of batteries.
• Always switch off the unit when not in use.
• Always unplug the appliance from power supply, when no use long time.
Radio operations
• Press ON/OFF key once to switch on the system power.
• Press BAND key repeatedly to select the radio mode and the desired radio band: AM or FM
• Press NEXT/TUNE-UP button or BACK/TUNE-UP button and then release the button when the fast scanning starts. The frequency will continue to
change and will automatically stop when a broadcast station is received.
• To receive a weak broadcast signal press the NEXT/TUNE-UP or BACK/TUNE-DOWN button by one press at a time and adjust the frequency you wish
to receive.
4
Advertisement
Table of Contents
