Advertisement
POWER SUPPLY
BATTERY OPERATION
· Set the FUNCTION switch to the TAPE position.
· Open the battery compartment cover.
· Insert 4 batteries (UM-1). Please observe correct battery polarities or the set will not work.
· Close the battery compartment cover.
AC OPERATION
· Before the first connecting of the appliance check that voltage indicated on the rating label corresponds the mains voltage in your home.
· Plug the corresponding end of cord into the AC socket on the rear of the set.
· Insert the plug into power supply.
CAUTION:
· When the set is only used with AC or is not used for 4 weeks or more, please remove the batteries, to avoid damage to the set from
leakage of batteries.
· Always unplug the appliance from power supply, when no use long time.
· This radio cannot be operated by batteries if the AC power cord is connected to the unit.
RADIO OPERATION
OPERATION
· Set Function switch to RADIO position.
· Select your desired broadcasting band with Band switch.
· Rotate the Tuning control regulator to receive the desired broadcast.
· Adjust the level of sound with Volume control switch.
· To turn off the radio, set the Function switch to TAPE position.
ANTENNA
· For FM reception, adjust the telescopic antenna appropriately to obtain the best reception on the band selected.
· The AM signals are picked up through the built-in ferrite antenna. The set should be placed to a position for the best reception.
CAUTION:
· Do not connect FM antenna to an external antenna.
3
Advertisement
