Quirky ISO Manual page 13

4 Pull down on ceiling panel with both hands until it separates
from ceiling but is still suspended by the springs.
5 Disconnect the rainbow colored cable from the ceiling
panel by pulling on the connector.
6 Remove the ceiling panel by squeezing the springs
and pulling down.
TO CLEAN
1 Remove dust and dirt from the fan housing
with a vacuum cleaner.
2 Dampen cloth with dish detergent, wipe the fan housing and
dry with a cloth. DO NOT USE abrasive cloth, steel wool pads,
or scouring pads.
3 Replace the ceiling panel by following steps 7–13 under
installation in "New Construction".
TO CHANGE A LIGHT BULB
1 Turn the fan light off.
2 Unscrew the four (4) screws and carefully remove
the glass and metal assembly.
3 Remove the necessary light bulb and discard.
4 Screw in appropriate light bulb (see Installation
step 11 for proper light bulb specifications).
5 Reattach glass and metal assembly with the four (4) screws.
|
ISO 13