Screen Menu - Hitachi CP-S210 User Manual

Multifunctional Settings (continued)

SCREEN Menu

With the SCREEN menu, the items shown in the table below can be
performed.
Perform each operation in accordance with the instructions in the
table below.
Item
BLANK
START UP
MENU POSITION
MESSAGE
RESET
Downloaded From projector-manual.com Hitachi Manuals
30
Select a Blank Screen Color:
BLUE WHITE
• The blank screen of selected color is displayed by pressing the BLANK
button. Please refer to the section "Temporarily Blanking The Screen" of
"Operating" about the screen blanking.
Select the Start Up Screen:
TURN ON
• If the TURN ON is selected when there is no signal or the detected signal is
out of specifications, the blank screen is displayed.
Adjust a Menu Position:
Pressing the or ENTER button start adjusting,
Up
Left
Down
• The button does not finish this item. When you want to return to the
previous display, please press the ESC button.
Select the Message Mode:
TURN ON
• When the TURN OFF is selected, the following message functions are
disabled:
The message of "AUTO IN PROGRESS"
The message of "NO INPUT IS DETECTED"
The message of "SYNC IS OUT OF RANGE"
The message while being searched for an input signal, "Searching ....."
The message when an input signal is detected, "Detecting ....."
The indication of the input signal by input change.
Reset the SCREEN Menu Items:
Selecting the EXECUTE performs this function.
EXECUTE CANCEL
• The items of the SCREEN menu are collectively returned to the initial setting.
Description
BLACK
TURN OFF
Right
TURN OFF
MENU
MAIN BLANK BLACK
PICTURE-1 START UP TURN ON
PICTURE-2
MENU POSITION
INPUT
MESSAGE TURN ON
AUTO RESET
SCREEN
OPTION
: SELECT