Turning Off The Power - Hitachi CP-S210 User Manual

Power ON/OFF (continued)

Turning Off The Power

NOTE
• Turn the power on/off in right order. Please power on the projector before
the connected devices. Power off the projector after the connected devices.
Press the STANDBY/ON button of the
1
projector or the
control.
The message "Power off?" will appear on the screen
for approximately 5 seconds.
Press the STANDBY/ON button again
2
while "Power off?" the message is
visible.
The projector lamp will go off, and the POWER
indicator will begin blinking orange.
Then the POWER indicator will stop blinking and light
to solid orange when the lamp cooling is complete.
Switch the power switch to [O] (OFF).
3
The POWER indicator will go off.
Attached the lens cap.
4
Downloaded From projector-manual.com Hitachi Manuals
16
button of the remote
Power switch (OFF position)
POWER indicator
TEMP
POWER
LAMP
INPUT
STANDBY/ON
MENU
STANDBY/ON button
Power switch
(STANDBY/ON) button
VIDEO RGB SEARCH
ASPECT AUTO BLANK
MAGNIFY VOLUME
ON