Navig8r NAVCAM-FHDGPS Crash Cam FHD GPS User Manual page 8

NAVCAM-FHDGPS
Available Video Options:
Option Selection Options
Resolution
Select:
FHD 1920x1080
Resolution
HD 1440x1080
HD 1280 x 720 50fps
HD 1280 x 720 30fps
Select[Off, 1 or 2 or 3 or 5 or
Loop recording
10 Minute]
+2.0,5/3,+4/3,+1.0,+2/3,+1/3
Exposure ,+0.0,-1/3,-2/3,-1.0,-4/3,
-5/3,-2.0
Motion
Select [On/Off]
detection
Record Audio Select [On/Off]
Select [On/Off]
Date stamp
G-Sensor Select [Off/Low/Mid/ High]
USER MANUAL
Option Description
Full HD 1920x1080 gives higher image
quality, less record time
Select the time for each recording
segment. For example, if set to "1", then
each video recorded is 1minute long. If set
to "off", then the camera will record until
the SD card is full.
Use this setting to adjust for varying
lighting conditions. Usually +0/0 is suitable
for most environments
When set to "On", the CRASHCAM-
FHDGPS will begin recording when it
senses movement. For example, if the
CRASHCAM-FHDGPS is left on, the camera
will begin recording if the image is
disrupted (like a person walking by).
Turns the built-in microphone On or Off.
For privacy this can be turned off so that
no audio is recorded.
Records the set date and time onto the
video file (date/time is set in the setup
options).
Select the level of sensitivity for the auto
bump file record feature. "Low" would
mean a BIG bump / knock / shock would
trigger the auto save feature. "High"
would mean a relatively small knock /
bump would trigger auto save.
NavCam-FHDGPS Manual Ver 2.1 09/2013
8