Related Manuals for Navig8r NAVC-703FHD
Summary of Contents for Navig8r NAVC-703FHD
- Page 1 USER MANUAL NAVC-703FHD Please read carefully before use It is recommended to use a minimum Class 4 (4Mb/s write speed) Micro SDHC card for optimal performance.
-
Page 2: Table Of Contents
Video mode setting Photo mode settings Setup settings Playback mode setting USB Connection Connecting the NAVC-703FHD in the car Trouble shooting / Q & A Product specifications IMPORTANT SAFETY INSTRUCTIONS AND PRECAUTIONS - Read all instructions carefully before use. - Retain manuals for future reference. -
Page 3: Product Connections And Use
* Memory Card required for operation The NAVC-703FHD requires a Micro SD card (not included) to record video / image content. (see page 8 for a table showing SD card capacity and the relevant amount of video / image content able to be stored). -
Page 4: Power On/Off Function (Auto On/Off)
NAVC-703FHD Power on/off function (auto on/off) To turn on the NAVC-703FHD, press and hold the power button on the side of the device. To turn off, press the power button. Note: The current video will be saved automatically if you are in the middle of a recording and you need to turn the camera off. -
Page 5: Navigating Around Menu Settings
USER MANUAL NAVC-703FHD Navigating around Menu settings - Press the MENU button from any mode (Video, Photo, Playback) to enter each MENU option - Use the MENU button again to toggle forward to each option - Use the LEFT and RIGHT arrows to scroll UP or DOWN through each option... -
Page 6: Photo Mode Settings
USER MANUAL NAVC-703FHD Photo Mode Settings Menu Option Selection Options Option Description 5M High image quality, least amount of photos. Resolution Select [5M,2M, 1.3M] 3M Medium image quality, ave. amount of photos. 1.3M Low image quality, most amount of photos. -
Page 7: Playback Mode Setting
This pause time will not be recorded. 3) As the NAVC-703FHD has a DC5V input, please use the original car charger which will step down the car’s 12V to 5VDC and fuse the circuit in the event of an overload. -
Page 8: Connecting The Navc-703Fhd In The Car
The above wiring diagram shows a left hand drive vehicle. Wiring path is only a suggestion. 1. NAVC-703FHD device mounted behind the rear vision mirror. 2. 12v DC cable routed behind rear vision mirror 3. Cable hidden behind roof headlining 4. -
Page 9: Trouble Shooting / Q & A
Once the wiring and installation of the NAVC-703FHD have been completed, please check the following: - With the car’s ignition on (or engine started), the red LED indicator on the NAVC-703FHD will light up and the LCD screen should turn on. Recording should start automatically. This will indicate a successful installation –... -
Page 10: Product Specifications
Warranty Against Defects Navig8r is a brand sold and marketed by Laser Corporation Pty Ltd (“Laser”). Laser hereby warrants your new product to be free from defects in materials and workmanship for 12 months, from the date of purchase, provided that the product is used in accordance with accompanying recommendations or instructions where provided.