Freecom Network Drive User Manual page 16

Freecom Network Drive
Setting up the language
EN
If the web interface is not displayed correctly, you can select the correct region code
page here. Select the correct code page from the pull-down list and click on "Change"

to apply your setting.
Note: You have to restart your PC to apply the settings! The web interface
language will always be English, this cannot be changed!
Firmware Version
In the "Firmware Version" section you can find information which firmware version is
used in your device. Please have this information available for the Freecom Support if
you have problems with your Freecom Network Drive.
.. Status – Network Information
DHCP Server Configuration
In this section you can select whether to use the Freecom Network Drive as DHCP Server or not.
To enable the DHCP Server, select the "Enable" button and click on "Apply". If the DHCP
Server is already enabled and you want to disable it, select the "Disable" button and
click on "Apply".
Note: The current status of the DHCP Server is displayed to the left of the
"Enable" button.
.. Status – Disk Information
In this section, the status of the hard disk is displayed. You can find the following infor-
mation:
Disk ID:
Free Size:
Total Size:
1
Displays information about the hard disk
Shows the available free space of the hard disk
Shows the total size of the hard disk