Freecom Network Drive User Manual page 24

Freecom Network Drive
..1 Internal FTP access
EN
Use any FTP client software (e.g. WS_FTP, SmartFTP or CuteFTP) or open your browser
and enter

ftp://USERNAME:USERPASSWORD@<IP ADDRESS> or
ftp://USERNAME:USERPASSWORD@<HOST NAME>
<USERNAME> = user name
<USERPASSWORD> = password of user
<IP ADDRESS> = IP address of your Freecom Network Drive
<HOST NAME> = Host name of the Freecom Network Drive as specified in the settings
.. External FTP access (via Internet)
To access the Freecom Network Drive via FTP from the Internet, make sure that the FTP
port specified in the Network Drive settings is forwarded to the Network Drive IP address
in the port forwarding settings of your router!
Please consult the user manual of your router for further information
how to setup port forwardings!
Use any FTP client software (e.g. WS_FTP, SmartFTP or CuteFTP) or open your browser
and enter
ftp://USERNAME:USERPASSWORD@YOUR_INTERNET_IP
or
ftp://USERNAME:USERPASSWORD@YOUR_DYNDNS_HOST
<USERNAME> = user name
<USERPASSWORD> = password of user
< YOUR_INTERNET_IP > = your WAN IP address
< YOUR_DYNDNS_HOST > = your Dynamic DNS host name (if supported by your router)
Note: Not all browsers can upload data via FTP. Those that can are e.g.
Internet Explorer and Konqueror. We recommend using FTP client soft-
ware such as WS_FTP, SmartFTP or CuteFTP.
4