Uniden UCIS-3050C Owner's Manual page 20

5.
6.
(A) After selecting the language, the
(B) If you dial your local calls using
(C) The display flashes "ENTER AREA CODE" and "10 DIGITS
6
plug one of these devices into the "DATA" jack on the right side
of the phone. The important thing to remember is that for the
Caller ID features to work properly the Caller ID telephone must
be plugged directly into the wall jack and other devices must
be plugged into the Caller ID phone.
Selecting a language
When the phone is powered up for the first time, the display
flashes "SELECT LANUGAGE" and ">ENG ESP FRA".
To select English, press the "1"
button.
To select Spanish, press the "2"
button.
To select French, press the "3"
button.
Then, press the Dial/Enter but-
ton to confirm the selection.
Program your area code
display flashes "ENTER AREA
CODE" and "7 DIGITS
7 digits (e.g., 555-1212), then en-
ter your local area code, press the
Dial/Enter button, and go to
Step C.
If you dial your local calls using
10 digits (e.g., 303-555-1212),
then enter "000" as the area code
for 7 digits dial, and press the Dial/Enter button to go to Step
C.
DIAL".
DIAL".