Display Setting; Local Time Setting; Timer Setting - Labgear HDSR300 User Manual

5.3 Display Setting

You can set Brighness, Contrast and
Saturation.

5.4 Local Time Setting

you can set your STB's time. This function is
useful for EPG and some timer functions.
If a broadcaster provides GMT signal, you can set
the time using GMT or set your own time by
yourself.
If the "GMT usage" is set to "Off", you can only
set Date and Time.
If you set "GMT Usage" to "On", you can select
"GMT Offset" and set "Summer Time" to "On" or "Off".

5.5 Timer Setting

You can set the timer to make the receiver perform designated actions including timer
based wake up or sleep instructions to the set-top-box.
Use the UP/DOWN buttons to select timer. Press the OK button to enter your
selected timer settings.
You can set it as follow:
Timer Mode: To select the timer mode, Once,
Daily or Off.
Timer Service: To select timer service, Channel or
Record.
Wakeup Channel: To select the wakeup channel
of the timer action.
Wakeup Date: To set the date of the timer action.
On Time: To set the time of the timer action.
Duration: To set the duration time.
14