DeWalt DWE46100 Instruction Manual page 9

5. Place the wheel onto the work surface and move the grinder from
right to left to cut around the inside corner for best dust collection.
6. Remove the tool from work surface before turning tool off. Allow
the tool to stop rotating before laying it down.
7. Close the corner door and lock in place using the cornering door
locking lever (E).
FIG. 4 F
Dust Extraction (Fig. 1, 5)
WARNING: Use only power tools recommended by D
this attachment.
For more information about D WALT power tools compatible with this
E
attachment, please contact your local dealer, call 1-800-4-D
(1-800-433-9258) or visit our website www.dewalt.com.
WARNING: This attachment MUST BE used with a dust extractor
system. ALWAYS wear certified safety face or dust mask.
NOTE: Ensure hose connection is secure.
F
E
WALT with
E
WALT
E
NOTE: The amount of dust retained by the dust extractor vacuum
is dependent on its filter system. Refer to the dust extractor vacuum
instruction manual for more information.
All D WALT dust collection shrouds are designed to work with the
E
D WALT universal DWV9000 connector.
E
1. Attach the DWV9000 connector (H) to your dust collector hose (K).
2. Unlock the DWV9000 connector (H) and slide onto dust port (A).
3. Lock the DWV9000 connector (H) to secure.
FIG. 5
K
A
TRADITIONAL DUST EXTRACTOR VACUUM HOSES
Attach recommended dust extractor vacuum hose to dust port (A).
7
H