H.264 DVR9004N Installation And Setup Manual page 98

APPENDIX C: HDD INSTALLATION
HDD mounting
brackets
PC board
5. Attach a mounting bracket to each side of the HDD as shown below using the pan-head medium-thread screws provided.
Use two screws for each bracket. After starting the screws, slide each brackets toward the front of the drive (away from the
connector end), then tighten until snug.
SATA data
and power
connectors
6. Position the HDD with the mounting brackets in the HDD bay as shown below with the SATA connectors toward the middle of
the chassis. Secure the HDD assembly to the chassis using the four screws removed in step 4 above.
92
HDD bays
Screws
SATA data cable
SATA power cable
Bracket
attached