DeVilbiss ATK90 Operator's Manual page 8

Free Speed @ 90 PSI
Maximum Working Pressure
Air Inlet
Recommended Hose Size
Maximum Torque
Accessories Required
Line pressure or hose inside diameter should be increased to
IMPORTANT:
compensate for unusually long air hoses (over 25 feet). Minimum hose diameter
should be 3/8" I.D. and fittings should have 1/4" NPT thread.
Operation
Before each use:
Drain water from air
l
compressor tank and con-
densation from air lines.
See air compressor's
operators manual.
Disconnect the ratchet
wrench from the air supply
before lubricating or
changing sockets.
Lubricate tool, see
l
"Maintenance" section in
this manual.
sockets and accessories.
Select the required impact socket. This tool has a 3/8" square drive, use
l
3/8" deep sockets. Use 3/8" extensions only when needed.
Connect tool to air hose of recommended size. NOTE: The use of a quick
connect set makes connecting easier.
IMPORTANT: The use of air filters and air line lubricators is
recommended.
D24152
3/8" Air Ratchet
SPECIFICATIONS
ASSEMBLY
OPERATION
Reverse/Forward Button
Impact wrench sockets and accessories must
be used with this tool. Do not use hand
8- ENG
150 RPM
(Forward/Reverse)
90 PSI
1/4" NPT
3/8" I.D.
45 Ft./Lbs.
Throttle Control Lever
Air Inlet