Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for DeVilbiss ATK90
- Page 1 Model ATK90 OPERATOR’S MANUAL SAFETY ASSEMBLY OPERATION MAINTENANCE ESPAÑOL Read Operator’s Manual. Do not operate equipment until you have read this Operator’s Manual for Safety, Assembly, Operation, and Maintenance Instructions. D24152 Rev. 0 6/11/01...
-
Page 2: Safety Guidelines - Definitions
SAFETY GUIDELINES - DEFINITIONS This manual contains information that is important for you to know and understand. This information relates to protecting YOUR SAFETY and PREVENTING EQUIPMENT PROBLEMS. To help you recognize this information, we use the symbols below. Please read the manual and pay attention to these sections. - Page 3 SAVE! IMPORTANT SAFETY INSTRUCTIONS SAVE! IMPROPER OPERATION OR MAINTENANCE OF THIS PRODUCT COULD RESULT IN SERIOUS INJURY AND PROPERTY DAMAGE. READ AND UNDERSTAND ALL WARNINGS AND OPERAT- ING INSTRUCTIONS BEFORE USING THIS EQUIPMENT.WHEN USING AIR TOOLS, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED TO REDUCE THE RISK OF PERSONAL INJURY.
-
Page 4: Risk Of Injury
WHAT COULD HAPPEN HOW TO PREVENT IT HAZARD • Tools left unattended, or with • Remove air hose when tool is the air hose attached can be not in use and store tool in RISK OF INJURY activated unauthorized secure location away from persons leading to their injury reach of children. -
Page 5: Risk Of Entanglement
WHAT COULD HAPPEN HOW TO PREVENT IT HAZARD RISK OF • Tools which contain moving • Never wear loose fitting elements, or drive other clothes, or apparel which ENTANGLEMENT moving tools, such as grinding contains loose straps or ties, wheels, sockets, sanding etc. -
Page 6: Specifications
1/2” Impact Wremch SPECIFICATIONS Maximum Torque 230 ft./lbs Free Speed @ 90 PSI 7,000 RPM Maximum Working Pressure 90 PSI Air Inlet 1/4” NPT Recommended Hose Size 3/8” I.D. ASSEMBLY Accessories Required Line pressure or hose inside diameter should be increased to IMPORTANT: compensate for unusually long air hoses (over 25 feet). -
Page 7: Maintenance
Set the air compressor’s regulator to 90 PSI. This tool operates at a maximum 90 PSI pressure. Turn torque regulator to desired torque. For 230 ft/lbs turn torque regulator clockwise until it stops. For 50 ft/lbs turn torque regulator counterclockwise until it stops. The torque regulator has a variable adjustment from 50-230 ft/lbs. - Page 8 3/8” Air Ratchet SPECIFICATIONS Free Speed @ 90 PSI 150 RPM (Forward/Reverse) Maximum Working Pressure 90 PSI Air Inlet 1/4" NPT Recommended Hose Size 3/8" I.D. Maximum Torque 45 Ft./Lbs. ASSEMBLY Accessories Required Line pressure or hose inside diameter should be increased to IMPORTANT: compensate for unusually long air hoses (over 25 feet).
- Page 9 To use: Turn air compressor on and allow air tank to fill. Set the air compressor’s regulator to 90 PSI. This tool operates at a maximum 90 PSI pressure. Place tool in forward or reverse position. Depress the throttle control lever to operate tool. NOTE: The throttle control lever provides instant response when depressed.
- Page 10 Air Hammer SPECIFICATIONS Blows Per Minute 4,500 Maximum Working Pressure 90 PSI Air Inlet 1/4" NPT Recommended Hose Size 3/8" I.D. ASSEMBLY Accessories Required IMPORTANT: Line pressure or hose inside diameter should be increased to compensate for unusually long air hoses (over 25 feet). Minimum hose diameter should be 3/8”...
- Page 11 MAINTENANCE Lubrication Air tools require lubrication throughout the life of the tool. The air motor and bearing uses compressed air to power the tool. Because moisture in compressed air will rust the air motor, you must lubricate the motor daily. An inline oiler is recommended.
- Page 12 Rotary Tool SPECIFICATIONS Free Speed (No Load) 25,000 RPM Maximum Working Pressure 90 PSI Collet Size 1/4", 1/8" Air Inlet 1/4" NPT Recommended Hose Size 3/8" I.D. ASSEMBLY Accessories Required IMPORTANT: Line pressure or hose inside diameter should be increased to compensate for unusually long air hoses (over 25 feet).
- Page 13 IMPORTANT: The use of air filters and air line lubricators is recom- mended. To use: Turn air compressor on and allow air tank to fill. Set the air compressor’s regulator to 90 PSI. This tool operates at a maximum 90 PSI pressure. Depress the throttle safety release and throttle control lever to operate tool.
-
Page 14: This Warranty Does Not Cover
All decisions of DeVilbiss Air Power Company Manufacturing with regard to this policy shall be final. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.