Specifications; Operation - DeVilbiss ATK90 Operator's Manual

Maximum Torque
Free Speed @ 90 PSI
Maximum Working Pressure
Air Inlet
Recommended Hose Size
Accessories Required
Line pressure or hose inside diameter should be increased to
IMPORTANT:
compensate for unusually long air hoses (over 25 feet). Minimum hose diameter
should be 3/8" I.D. and fittings should have 1/4" NPT thread.

Operation

Before each use:
Drain water from air compressor tank and condensation from air lines. See
l
air compressor's operators manual.
Disconnect the tool from the
air supply before lubricating
or changing sockets.
Lubricate tool, see
l
"Maintenance" section in this
manual.
sockets and accessories
must be used with this tool.
Do not use hand sockets and
accessories.
Select the required impact
l
socket. This tool has a 1/2"
square drive, use 1/2" deep sockets. Use 1/2" extensions only when
needed.
Connect tool to air hose of recommended size. NOTE: The use of a quick
l
connect set makes connecting easier.
IMPORTANT: The use of air filters and air line lubricators is
recommended.
To use:
Turn air compressor on and allow air tank to fill.
l
D24152
1/2" Impact Wremch

SPECIFICATIONS

ASSEMBLY
OPERATION
Impact
wrench
6- ENG
230 ft./lbs
7,000 RPM
90 PSI
1/4" NPT
3/8" I.D.
1/2"
Square
Torque
Drive
Adjustment
Forward/
Reverse
Lever
Trigger
Air Inlet