D-Link DVG-2001S Manual page 44

Frequently Asked Questions (continued)
How can I setup my router to work with a Cable modem connection?
S t e p 1
Power cycle the cable modem and router:
Turn the cable modem off (first). Turn the router off Leave them off for 2 minutes.**
Turn the cable modem on (first). Wait until you get a solid cable light on the cable
modem. Turn the router on. Wait 30 seconds.
** If you have a Motorola (Surf Board) modem, leave off for at least 5 minutes.
S t e p 2
Follow step 1 again and log back into the web configuration. Click the Status tab
and click the Device Info button.
S t e p 3
Log into the web based
configuration by typing in the IP
Address of the VoIP Terminal
Adapter (default:10.1.1.1) in your
web browser. The username is
admin (all lowercase) and the
password is admin (all lowercase).
S t e p 4
Click the Home tab and
click the WAN button. Select Static
IP Address and enter your static
settings obtained from the ISP in the
fields provided.
If you do not know your settings, you
must contact your ISP.
S t e p 5
Click on Apply and then
click Continue to save the changes.
S t e p 6
Click the Status tab and
click the Device Info button. Your IP
Address information will be displayed under the WAN heading.
Static Cable Connection
41