OPERATION
Temporary Manual Override
To temporarily change the current set temperature without affecting your program:
■ Press
■ Press
ret/clear
■ Press to return to normal mode, or wait 5 seconds for it to return auto-
■ The current program number will flash to signify the Temporary Over-
■ At the next program change, the Temporary Override is canceled,
To end the Temporary Manual Override:
ret/clear
■ Press to return the set temperature to the current program set temperature.
NOTE: The Auto Season Changeover feature6will not operate while the thermostat is in Temporary Manual Over-
ride. Refer to the Auto Season Changeover feature on page 9 for more information
NOTE: If Vacation Hold is set, then the number of days remaining will also be displayed. Refer to the Vacation (Pro-
grammable) Hold section on page 8 for more information.
or
Manual Override mode. Display will flash.
or
perature.
matically.
ride.
and the next program temperature becomes the setpoint tem-
perature.
and hold for about second to enter
to change to your desired new tem-
.