Clearances To Combustibles (Us & Canada); Hearth Pad Requirements (Us & Canada) - Quadra-Fire MTV-E2-CSB Installation Manual

MT VERNON E2
B. Clearances to Combustibles (US & Canada) C. Hearth Pad Requirements (US & Canada)
A
B
Straight Back Against Wall
A Back Wall to Appliance
B Side Wall to Appliance
Corner Installation
C Walls to Appliance
Installations with:
3 to 3 inch Top Vent Adapter and
3 to 6 inch Offset Adapter Kit
F
D
E
Vertical Installation
D Back Wall to Flue Pipe
E Side Wall to Appliance
F Back Wall to Appliance
Corner Installation
G
Side Wall to Flue Pipe
Alcove Installation
Minimum Alcove Height
Minimum Alcove Side Wall
Minimum Alcove Width
Maximum Alcove Depth
NOTE:
• Illustrations reflect typical installations and are FOR
DESIGN PURPOSES ONLY.
• Illustrations/diagrams are not drawn to scale.
• Actual installation may vary due to individual design
preference.
8
C
C
Inches Millimeters
2 51
6 152
Inches Millimeters
2 51
G
G
Inches Millimeters
3 76
6 152
8 203
Inches Millimeters
3 76
Inches Millimeters
43 1092
6 152
40 1016
36 914
7080-131B
Use a non-combustible floor protector, extending beneath
appliance and to the front, sides and rear as indicated. Mea-
sure front distance "M" from the surface of the glass door.
K
Hearth Pad Requirements
K Sides
L* Back
M Front
*L Exception for Horizontal Installations:
USA INSTALLATIONS: A non-combustible floor protec-
tion is recommended extending beneath the flue pipe when
installed with horizontal venting or under the Top Vent
Adapter with vertical installation.
CANADA INSTALLATIONS: A non-combustible floor pro-
tection extending beneath the flue pipe is required with hor-
izontal venting or under the Top Vent Adapter with vertical
installation.
Must extend 2 inches (51mm) beyond each
side of pipe (shaded area)
WARNING
Fire Risk.
Comply with all minimum clearances to
combustibles as specified.
Failure to comply may cause house fire.
L*
K
M
Inches Millimeters
2 200
2 200
6 450
March 14, 2014