Change Sensor And Relay Settings - RapidOS RL 3120RH User Manual

6.5.2 Change Sensor and Relay Settings

A. Sensor Mapping
Sensor has to be matched to a camera, but still depends upon the number of available cameras.
This means that for each sensor, the assigned camera will record whenever the sensor detects a
motion. For example, you selected camera 1,2 &3 for Sensor 2. whenever Sensor 2 detects a
motion all three cameras you have selected will start recording.
NOTE: Only one sensor is required, which matches the Camera and relay.
1. Camera selection (Sensor Mapping): select cameras for which recording will be
triggered when selected sensor is triggered
2. Sensor selection: select only one sensor to map with selected camera(s) and relay(s)
3. Apply button: click on to apply the changes done
4. Restore default: restore the settings to default
46