6.3 Surveillance function
Surveillance function settings covers all the configurations regarding the surveillance part, such
as Motion Detection, Audio and Emap.
6.3.1 Change Zone Settings of Motion Detection
Motion Detection is concerned with how motion will be identified by the sensors. In this DVR,
detecting motion can be set by which zones the Motion will be detected.
And to set the zones, you must select a Camera first, then select which zone will be detected.
After you select the zone you may test the settings and then click on Apply button to apply your
new settings.
1. Select Camera: click on the drop-down button to choose the Camera number
2. Select button: selects the areas for motion detection
3. Erase button: erases areas from motion detection
4. Clear All button: removes all areas
5. Apply button: applies the changes done
31