Philips Brilliance BDM3470UP User Manual page 13

2. Setting up the monitor
• PiP / PbP Input: There are four different
video input to choose as the sub display
source: [DVI], [HDMI], and [DisplayPort].
Please refer below table for compatibility
of main/sub input source.
Inputs
VGA
MAIN
DP
SOURCE
DVI
(xl)
HDMI
• PiP Size: When PiP is activated, there are
three sub-window sizes to choose: [Small],
[Middle], [Large].
• PiP Position: When PiP is activated, there
are two sub-window positions to choose.
Top-Right
B
A
(main)
SUB SOURCE
POSSIBILITY (xl)
VGA DP DVI HDMI
● ● ●
● ● ●
● ● ●
● ● ●
B
Small
A
Middle
Large
(main)
Bottom-Right
A
(main)
B
• Swap:
The main picture source and the
sub picture source swapped on the
display.
Swap A and B source in [PiP] mode:
A
(main)
Swap A and B source in [PbP] mode:
B A
• Off:
Stop MultiView function.
Note
• When you do the SWAP function, the
video and its audio source will swap
at the same time. (Refer to page 7
"Independent audio playback, regardless of
video input" for more detail.)
• DisplayPort supports resolution to only
3440 x 1440 @ 30 Hz when in PBP mode
or when it is the sub source in PIP mode; it
supports resolution to 3440 x 1440 @ 60
Hz when it is the main source in PIP mode.
11
B
↔
A
↔
(main)
A
(main)
A
B
(main)
B
(main)