Advertisement
Available languages
Available languages
SAVE THESE INSTRUCTIONS
Product Features (Fig. A)
1. On/Off slide switch
2. Release button
3. Dust bowl
How To Use
INSTALLATION INSTRUCTIONS (FIG. B)
The Dustbuster can be mounted to most walls when using the Wall Mount System included
with this product. Fix the wall mount within reach of an electrical outlet (Figure B). Mount
securely using appropriate length screws into framing studs or spring type wall anchors into
wallboard, etc. To charge, mount unit into place using wall mount hook at the top of the
handle. Next plug power supply plug into nearby 120 volt electrical outlet. Ensure cord is
not too tight so as to pull unit off wall mount. The unit can also be charged when placed in
a convenient position.
RECHARGING (FIG. C)
From new, the rechargeable cells of the product need a minimum charge time of 16 hours
to ensure full power. We suggest you fully discharge the product when it is used for the first
time as this will help the cells recharge faster. The switch must be in the off ("O") position,
the product will not charge if it is in any other position. While charging, the product may get
warm, this is perfectly normal and safe. It can remain on charge indefinitely without damage
or danger. It is not possible to "overcharge" the battery cells with the charger provided.
OPERATION (FIG. D)
To start, slide the On/Off switch forward (i.e. "O"= Off, "I" = On). To stop, slide the switch
back.
• For best performance on hard surface wet pickups, insert Squeegee into the Bowl Nozzle
Opening.
• Do not fill the Bowl beyond the end of the Intake Chute (K). If there is any liquid in the
Bowl, do not turn the unit upside down, sideways, point the Nozzle upward, or shake the
Vac excessively.
• After picking up liquid substances clean the Vac and filter immediately. Mold and mildew
may form if the unit is not properly cleaned after wet pickups.
Always return the product to the power supply immediately after use so that it will be ready
and fully charged for the next use. Ensure that the product is fully engaged with the power
supply plug.
CLEANING THE PRODUCT (FIGS . E-I)
WARNING:
Never use the DustBuster
NOTE: The filters are re-usable, do not confuse them with disposable dust bags, and do not
throw them away when the product is emptied. We recommend that you replace the filters
every 6-9 months.
FIG. E
• Remove the dust bowl by pressing the dust bowl release button and pulling the
bowl down and out. To replace the bowl, place it back onto the handle and click
firmly into position.
FIG. F
• While holding the Bowl over a wastebasket, pull out hard filter and foam filter to
remove.
FIG. G
• Empty the dust from the bowl and wash if necessary.
FIG. H
• Wash the filter regularly using warm, soapy water and ensure that it is
completely dry before using it again. The cleaner the filters are, the better the
product will perform. It is very important that the filter is correctly in position before
use. The dust bowl can also be washed in warm soapy water. Ensure that it is dry
before re-attaching.
IMPORTANT: Maximum dust collection will only be obtained with clean filters and an empty
dust bowl. If dust begins to fall back out of the product after it is switched off, this indicates
that the bowl is full and requires emptying.
FIG. I
• Never immerse the product in water. A damp cloth and soapy water should be
used to clean the exterior of the motor section. Always ensure the product is
completely dry before re-use or storing.
ECONOMIC USAGE
• Your product is very economical to charge. While it is charging it uses less than half the
amount of electricity used by a common night light.
• When fully charged, the average effective usage times are between 8-10 minutes.
• It may take several chargings before these times can be achieved.
OTHER INFORMATION
If the product does not work, check the following:
• The power supply plug was correctly plugged in for recharge. (It feels slightly warm to the
touch.)
• The power supply plug is not damaged and is correctly attached to the base.
• The power supply plug into a working electrical outlet.
ACCESSORIES
Accessories are stored on the product (FIG. J) and are fitted into the nose of the product for
use.
MAINTENANCE
Use only mild soap and damp cloth to clean the vac. Never let any liquid get inside the vac;
never immerse any part of the vac into a liquid.
NOTE: Make sure the vacuum is completely dry before using it.
IMPORTANT: To assure product SAFETY and RELIABILITY, repairs, maintenance and
adjustment (other than those listed in this manual) should be performed by authorized
service centers or other qualified service organizations, always using identical replacement
parts.
BATTERY REMOVAL AND DISPOSAL
NOTE: Once removed, the battery cannot be refitted.
This product uses nickel-cadmium (Ni-Cd) rechargeable and recyclable batteries. When
the batteries no longer hold a charge, they should be removed from the Vac and recycled.
They must not be incinerated or composted.
The batteries can be taken for disposal to a Black & Decker, Company-Owned or
Authorized Service Center. Some local retailers are also participating in a national
TM
recycling program (see "RBRC
Seal"). Call your local retailer for details. If you bring the
batteries to a Black & Decker Company-Owned or Authorized Service Center, the Center
will arrange to recycle old batteries. Or, contact your local municipality for proper disposal
instructions in your city/town.
To Remove The Battery Pack For Disposal: (FIG. L)
Insert a flat head screwdriver into the tab area located above the jack plug hole on the
bottom of the Dustbuster. Use the screwdriver to pry the heel away from the Dustbuster.
Once the heel is removed you will see the batteries in a plastic casing. Remove the safety
label from the battery casing and grasp the pull tab to pull the casing out of the unit.
If the batteries have leaked or vented, protective gloves should be worn before touching the
casing.
IMPORTANT: DO NOT remove the batteries from inside the plastic casing. Do no replace with
any batteries other than those supplied by Black & Decker.
THE RBRC™ SEAL
The RBRC™ (Rechargeable Battery Recycling Corporation)
Seal on the nickel-cadmium battery (or battery pack) indicates that the costs to
recycle the battery (or battery pack) at the end of its useful life have already been paid by
Black & Decker. In some areas, it is illegal to place spent nickel-cadmium batteries in the
trash or municipal solid waste stream and the RBRC program provides an environmentally
conscious alternative.
RBRC in cooperation with Black & Decker and other battery users, has established
4. Wall mount
5. Power supply plug
®
without its filters.
programs in the United States and Canada to facilitate the collection of spent nickel-
cadmium batteries. Help protect our environment and conserve natural resources by
returning the spent nickel-cadmium battery to an authorized Black & Decker service center
or to your local retailer for recycling. You may also contact your local recycling center for
information on where to drop off the spent battery, or call 1-800-8-BATTERY.
REPLACEMENT FILTERS
For replacement filters use Cat. No. VF72
TROUBLE SHOOTING
If the product does not work, check the following:
• That the charge indicator light is on when unit is in base.
• The charger was correctly plugged in for recharge. ( It feels slightly warm to the touch.)
• The charger cord is not damaged and is correctly attached to the base.
• The charger is plugged into a working electrical outlet.
• That the switch is in the "OFF" position when charging.
SERVICE INFORMATION
Black & Decker offers a full network of company-owned and authorized service locations
throughout North America. All Black & Decker Service Centers are staffed with trained
personnel to provide customers with efficient and reliable power tool service.
Whether you need technical advice, repair, or genuine factory replacement parts, contact
the Black & Decker location nearest you. To find your local service location, refer to the
yellow page directory under "Tools—Electric" or call: 1-800-54-HOW TO (544-6986).
FULL TWO-YEAR HOME USE WARRANTY
Black & Decker (U.S.) Inc. warrants this product for two years against any defects in material
or workmanship. The defective product will be replaced or repaired at no charge in either of
two ways.
The first, which will result in exchanges only, is to return the product to the retailer from
whom it was purchased (provided that the store is a participating retailer). Returns should be
made within the time period of the retailer's policy for exchanges (usually 30 to 90 days after
the sale). Proof of purchase may be required. Please check with the retailer for their specific
return policy regarding returns that are beyond the time set for exchanges.
The second option is to take or send the product (prepaid) to a Black & Decker owned or
authorized Service Center for repair or replacement at our option. Proof of purchase may
be required. Black & Decker owned and authorized Service Centers are listed under "Tools-
Electric" in the yellow pages of the phone directory.
This warranty does not apply to accessories. This warranty gives you specific legal rights
and you may have other rights which vary from state to state. Should you have any
questions, contact the manager of your nearest Black & Decker Service Center.
This product is not intended for commercial use.
Imported by
Black & Decker (U.S.) Inc.,
701 E. Joppa Rd.
Towson, MD 21286 U.S.A.
MODE D'EMPLOI
M
'
M
'
ERCI
D
A
VOIR
ERCI
D
A
VOIR
V
.B
V
.B
ISITEZ
WWW
LACKAND
ISITEZ
WWW
LACKAND
POUR
ENREGISTRER
POUR
ENREGISTRER
AVANT DE RETOURNER CE PRODUIT POUR QUELQUE
RAISON QUE CE SOIT, COMPOSER LE
1-800-544-6986
AVANT D'APPELER, AYEZ EN MAIN LE N° DE CATALOGUE ET LE CODE DE DATE. DANS LA PLUPART DES
CAS, UN REPRÉSENTANT DE BLACK & DECKER PEUT RÉSOUDRE LE PROBLÈME PAR
TÉLÉPHONE. SI VOUS AVEZ UNE SUGGESTION OU UN COMMENTAIRE, APPELEZ-NOUS. VOS
IMPRESSIONS SONT CRUCIALES POUR BLACK & DECKER.
Pour l´achat d´un filtre de rechange
composer le 1-888-678-7278.
CONSERVER CE MODE D'EMPLOI POUR UN USAGE ULTÉRIEUR.
POUR UN USAGE DOMESTIQUE UNIQUEMENT.
IMPORTANTES MISES EN GARDE
Lorsqu'on utilise un appareil électrique, il faut toujours respecter certaines règles de sécurité
fondamentales, notamment les suivantes.
LIRE ET COMPRENDRE TOUTES LES DIRECTIVES AVANT D'UTILISER L'APPAREIL.
LIGNES DIRECTRICES EN MATIÈRE DE SÉCURITÉ - DÉFINITIONS
Il est important que vous lisiez et compreniez ce mode d'emploi. Les informations qu'il
contient concernent VOTRE SÉCURITÉ et visent à ÉVITER TOUT PROBLÈME. Les
symboles ci-dessous servent à vous aider à reconnaître cette information.
DANGER :
Indique une situation dangereuse imminente qui, si elle n'est pas évitée,
causera la mort ou des graves blessures.
AVERTISSEMENT :
dangereuse qui, si elle n'est pas évitée, pourrait causer la mort ou de graves blessures.
MISE EN GARDE :
qui, si elle n'est pas évitée, pourrait causer des blessures mineures ou modérées.
MISE EN GARDE :
une situation potentiellement dangereuse qui, si elle n'est pas évitée, peut résulter en des
dommages à la propriété.
AVERTISSEMENT :
contiennent des produits chimiques reconnus par l'État de la Californie comme étant
cancérogènes et pouvant entraîner des anomalies congénitales et d'autres risques pour la
reproduction tels que l'amiante et le plomb contenu dans les peintures au plomb.
AVERTISSEMENT :
cendie, de secousses électriques ou de blessures.
• Exercer une étroite surveillance lorsqu'on utilise l'appareil près d'un enfant ou que
l'appareil est utilisé par ce dernier. Il ne s'agit pas d'un jouet.
• Afin d'éviter les risques de secousses électriques, ne pas immerger l'appareil ni son chargeur.
• Ne pas se servir d'un aspirateur portatif pour déchets secs ou humides pour aspirer des
substances toxiques, des liquides inflammables ou combustibles (de l'essence, par
exemple), ni s'en servir dans un endroit renfermant de tels produits.
• Ne pas nettoyer un appareil électrique branché.
• Ne pas se servir de l'appareil en présence de vapeurs explosives ou inflammables.
• Ne pas utiliser un appareil dont le cordon ou le chargeur est endommagé, ni un appareil
qui ne fonctionne pas bien, qui est tombé, endommagé, resté à l'extérieur ou a été
immergé. Le confier à un centre de service autorisé.
• Ne pas utiliser un aspirateur portatif DustBuster
des surfaces mouillées. Ne pas utiliser un aspirateur portatif pour déchets secs ou
See 'Tools-Electric'
– Yellow Pages –
for Service & Sales
B
& D
B
& D
CHOISI
LACK
ECKER
CHOISI
LACK
ECKER
D
.
/N
O
D
.
/N
O
ECKER
COM
EW
ECKER
COM
EW
VOTRE
NOUVEAU
PRODUIT
VOTRE
NOUVEAU
PRODUIT
Indique une situation potentiellement
Indique une situation potentiellement dangereuse
Utilisé sans le symbole d'alerte à la sécurité, indique
Certaines poussières domestiques
Afin de minimiser les risques d'in-
md
pour déchets secs à l'extérieur ni sur
!
!
WNER
WNER
.
.
Advertisement
