Carton Inventory; Installation Hardware - Chamberlain LiftMaster Pro Security + 3265 Owner's Manual

Carton Inventory

Your garage door opener is packaged in two cartons
which contain the motor unit and all parts illustrated
below. Accessories will depend on the model purchased.
Multi-Function
Door Control Panel
Motor Unit with Light Lenses
Header Bracket
Chain
Pulley Bracket
Safety Sensor
Bracket (2)

INSTALLATION HARDWARE

Hex Bolt 5/16"-18x7/8" (4)
Lag Screw 5/16"-9x1-5/8" (2)
Lag Screw 5/16"-18x1-7/8" (2)
Clevis Pin 5/16"x2-3/4" (1)
Clevis Pin 5/16"x1-1/4" (1)
Clevis Pin 5/16"x1" (1)
Nut 5/16"-18 (4)
Lock Washer 5/16" (4)
Screw 6ABx1-1/4" (2)
Screw 6-32x1" (2)
Self-Threading Screw 1/4"-14x5/8" (2)
If anything is missing, carefully check the packing
material. Parts may be stuck in the foam. Hardware for
installation is also listed below.
®
SECURITY
3-Button Remote Control
Remote Control
Transmitter Visor Clip
Trolley
2 Conductor Bell Wire
White & White/Red?
The Protector System ®
(2) Safety Reversing Sensors
(1 Sending Eye and 1 Receiving Eye)
with 2-Conductor White & White/Black
Bell Wire attached
Insulated Staples (30)
Ring Fastener (3)
Drywall Anchors (2)
Rail Grease
Carriage Bolt 1/4"-20x1/2" (2)
Wing Nut 1/4"-20 (2)
Rope
Handle
5
Chain
Curved Door
One-Piece
Arm Section
T-rail
Door Bracket
Safety Labels
and
Literature
Sprocket Cover
Styrofoam
Straight Door
Arm Section