Midea PORTABLE AIR CONDITIONER Owner's Manual page 12

Foam seal A
(adhesive type)
26.5 ~ 48
Window stool
Window stool
Foam seal
Installation in a double-hung sash
windows
1. Cut the foam seal(adhesive type) to the proper length and
attach it to the window stool. Fig.10
2. Attach the window slider kit to the window stool. Adjust the
Fig.10
length of the window slider kit according to the width of
window, short the adjustable window kit if the width of
window is less than 27 inches.
Open the window sash and place the window slider kit on
the window stool. Fig.11
Window kit
3. Cut the foam seal(adhesive type) to the proper length
and attach it on the top of the window. Show as in Fig.12
4. Close the window sash securely against the window.
Fig.11
5. Cut the foam seal to an appropriate length and sealing the
open gap between the top window sash and outer window
sash. Show as in Fig.13.
Window kit
Fig.12
Fig.13
INSTALLATION INSTRUCTIONS
10