Checking The Drain Pump Usage - Samsung MWR-WH00 Installation Manual

Additional Functions (Continued)
Menu No.
Set value
24
E-

Checking the Drain Pump Usage

In order to check the drain pump usage using the wired remote
controller, hold down the
time for 5 seconds.
1
The menu will display .
Press the button until
2
Press the button.
The drain pump usage will be displayed.
Value
Use (Indoor unit Dip switch K4: Off)
Not Use (Indoor unit Dip switch K4: On(default))
3
Press the button to exit.
You will move to the menu selection display.
Note
 P ress the
without setting.
and buttons at the same
is displayed.
Data
button anytime during setup to exit