8e6 Technologies TAR S (5K02-62) Quick Start Manual page 21

C. At the Connect using field, select the COM port assigned to the serial port on the
laptop (probably "COM1"), and then click OK to open the Properties dialog box, dis-
playing the Port Settings tab:
D. Specify the following session settings:
• Bits per second: 9600
• Data bits: 8
• Parity: None
• Stop bits: 1
• Flow control: Hardware
E. Click OK to connect to the HyperTerminal session:
8 6 T a r
e hreaT nalysis eporTer
Q s G
uick TarT uide