Advertisement
Quick Links
LiMiTEd wARRANTy (ONE yEAR)
ON SiMPSON STRONg-TiE
Simpson Strong-Tie Company Inc. ("Simpson") provides this limited warranty to
original purchaser. This product, if properly used and maintained in compliance with
all instructions and warnings, will be free from substantial defects in material and
manufacturing for 1 year from purchase date. Purchaser's sole remedy is replacement
upon return to Simpson within 1 year of purchase (shipping prepaid).
WHERE LAWFUL, SIMPSON DISCLAIMS ALL OTHER
WARRANTIES, INCLUDING BUT NOT LIMITED TO IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
One Year
A PARTICULAR PURPOSE BEYOND THIS WARRANTY
Limited
PERIOD. SOME STATES DO NOT ALLOW LIMITATIONS
Warranty
ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE
ABOVE LIMITATION MAY NOT APPLY TO YOU. WHERE
LAWFUL, UNDER NO CIRCUMSTANCES SHALL SIMPSON
BE LIABLE FOR INCIDENTAL, CONSEQUENTIAL OR SPECIAL
DAMAGES OR DIRECT OR INDIRECT LOSS OF ANY KIND, INCLUDING BUT NOT LIMITED
TO BODILY INJURY, DEATH OR PROPERTY DAMAGE. SIMPSON'S ENTIRE LIABILITY IS
LIMITED TO THE PURCHASE PRICE OF THIS PRODUCT. SOME STATES DO NOT ALLOW THE
EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE
LIMITATION OR EXCLUSION. MAY NOT APPLY TO YOU. SIMPSON IS IN NO WAY LIABLE FOR
INCIDENTS RESULTING FROM USE WITHOUT PROPER CERTIFICATION OR DISREGARD OF
INSTRUCTIONS AND WARNINGS. THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL
RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.
The PTP-22 tool complies with OSHA requirements
and with ANSI A10.4 2007 specifications.
Return Tools To:
Northwest USA
Southwest USA
Simpson Strong-Tie Co.
Simpson Strong-Tie Co.
5151 S. Airport Way
260 N. Palm Street
Stockton, CA 95206
Brea, CA 92821
(209) 234-7775
(714) 871-8373
Southeast USA
Eastern Canada
Simpson Strong-Tie Co.
Simpson Strong-Tie Co.
1720 Couch Drive
5 Kenview Boulevard
McKinney, TX 75069
Brampton, Canada L6T 5G5
(972) 542-0326
(905) 458-5538
BRANd TOOLS
®
Northeast USA
Simpson Strong-Tie Co.
2600 International Street
Columbus, OH 43228
(614) 876-8060
Western Canada
Simpson Strong-Tie Co.
11476 Kingston Street
Maple Ridge, B.C. Canada V2X-0Y5
(604) 465-0296
Form T-SAS-PT2208 5/08
Read This Manual
BEfORE Operating This Tool
OPERATOR'S MANUAL
Model PT-22
5956 W. Las Positas Blvd., Pleasanton, CA 94588 • www.simpsonanchors.com
Advertisement
Related Manuals for Simpson Strong-Tie PT-22
Summary of Contents for Simpson Strong-Tie PT-22
- Page 1 LIMITED TO THE PURCHASE PRICE OF THIS PRODUCT. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION. MAY NOT APPLY TO YOU. SIMPSON IS IN NO WAY LIABLE FOR INCIDENTS RESULTING FROM USE WITHOUT PROPER CERTIFICATION OR DISREGARD OF INSTRUCTIONS AND WARNINGS.
- Page 2 If the tool does not function properly, tag it "WARNING - DO NOT USE" and return it as soon as possible to an autho- with a powder load in the chamber. rized Simpson Strong-Tie repair station or to the factory. emember Afety...
- Page 3 This tool uses .22 caliber loads to drive .300 headed fasteners or 1/4 inch threaded studs, ranging from 1/2 to 3 inches in length. The PT-22 has a fastener capacity of 3 inch fasteners and the PT-22S has a fastener capacity of 1-1/2 inches.
-
Page 4: Important Safety Information
2. POWER LOAD SELECTION procedures for them; however, THINKING IS YOUR RESPONSIBILITY. You must 1. The PT-22 is designed to use 4 levels of powder loads, each identified by understand ALL operating principles, safety features and fastening limitations of a number and color as follows: these tools, to use them without risk of serious injury or death to yourself or bystanders. -
Page 5: Important Safety Information
1. FASTENER SELECTION BASE MATERIAL SUITABILITY 1. The PT-22 is designed to set three types of fasteners, drive pins, Before fastening into any material, give it the center punch test. Using the threaded studs and special assemblies such as drive pins with fastener as a punch, and a hammer, strike a solid blow to the actual material pre-assembled washers, conduit clips and ceiling clips. - Page 6 2. Never attempt to alter, modify or manufacture parts for use in your D. DO NOT USE THESE TOOLS FOR FASTENING INTO: Simpson Strong-Tie tool, this can cause malfunctions and result in unsafe Vertical mortar joints. Bricks functioning of the tool.
- Page 7 Simpson Strong-Tie instructor. Following B. APPLICATIONS FOR THE PT-22: This tool is capable of making a wide range the rules of safe operation given to you here and verbally is of fastenings;...
- Page 8 5. Depress the tool firmly against GENERAL OPERATING PROCEDURES OF THE PT-22 the work surface using both 1. Always point the tool away from yourself and all bystanders. hands. Make certain you hold the 2. Never place your hand over the front (muzzle) end of the tool.
- Page 9 • If at any time during the operation of the tool you feel it is not working through the large opening in the properly, STOP using it and call your Simpson Strong-Tie distributor. receiver. Always start with the C. OPERATING PROBLEMS lightest load.
- Page 10 PT-22 (3" Fastener Capacity) PT-DC106 PT-DC102 NOSE PIECE PT-DC93 PT-DC112 PTM-01114 PTM-01107 PTM-03122 PTM-03108 PARTS LIST OF PT-22 PT-DC102 PT-22 Barrel PT-FP-DC1 Fastening Module - Includes the following: PT-DC106 Nose Piece Part # Description PT-DC93 Tool Body - Including Firing Mechanism...
Need help?
Do you have a question about the Strong-Tie PT-22 and is the answer not in the manual?
Questions and answers