Lift Valve Removal And Installation - Toro Groundsmaster 300 Series Service Manual

Lift Valve Removal and Installation (Fig. 35)
1. Unscrew the ball from the lift lever.
2. Remove the self-tapping screws and lift the cover off
of the lift lever to expose the valve.
3. Loosen and remove the hydraulic lines that are
attached to the valve. Cap or plug all of the fittings and
hoses to prevent contamination.
4. Remove the five cap screws and locknuts that secure
the valve and lever to the main frame.
5. Lift out the control valve.
Figure 35
6. Reverse order to install a new or reconditioned con-
trol valve.
®
Groundsmaster 300 Series Page 5 - 43 Repairs