Mitsubishi SUZ-KA35VA Service Manual page 111

OPERATING PROCEDURE
4. Removing the defrost thermistor, discharge temper-
ature thermistor, outdoor heat exchanger tempera-
ture thermistor and ambient temperature thermistor
(1) Remove the top panel, cabinet and service panel.
(Refer to 1.)
(2) Remove the back panel. (Refer to 1.)
(3) Remove the inverter assembly. (Refer to 2.)
(4) Pull out the defrost thermistor from its holder. (Photo 8)
(5) Pull out the discharge temperature thermistor from its
holder. (Photo 7)
(6) Pull out the outdoor heat exchanger temperature thermistor
from its holder. (Photo 8)
(7) Pull out the ambient temperature thermistor from its holder.
(Photo 8)
5. Removing outdoor fan motor
(1) Remove the top panel, cabinet and service panel.
(Refer to 1.)
(2) Remove the back panel. (Refer to 1.)
(3) Disconnect the following connectors;
Except for SUZ-KA50VAR2.TH
<Electric control P.C. board>
CN931 and CN932 (Fan motor)
SUZ-KA50VAR2.TH
<Inverter P.C. board>
CN931 and CN932 (Fan motor)
(4) Remove the propeller.
(5) Remove the screws fixing the fan motor.
(6) Remove the fan motor.
OC322G
Photo 7
Discharge temperature thermistor
Photo 8
Outdoor heat
exchanger
temperature
thermistor
Photo 9
Screws of the outdoor fan motor
Propeller
111
PHOTOS
Ambient
temperature
thermistor
Defrost
thermistor