Options - SANEI ELECTRIC Printy 3 BL-80RS II Instruction Manual

Options

(separately available)
1) Thermal paper BL-80-30 (dedicated paper)
- Width : 80 mm
- Length : 30 m
The paper will be sold in units of 10 rolls.
Note: Use BL-80-30 thermal paper that is dedicated for use with your printer.
If you attempt to use any paper other than specified, you should be
aware that the printing quality or thermal head service life may not be
guaranteed or the other troubles may occur.
2) AC adapter BL-100W
The AC-100 AC cable dedicated for BL-100W is separately required.
3) Battery pack UR-121 (lithium ion battery)
4) Charger NC-LSC05 (UR-121 dedicated charger)
5) Cable
a) BS-4-1.5 (D-SUB25Pconvex-D-SUB25Pconvex)
b) BL-2-1.5(D-SUB25Pconvex-half-pitch 14Pconvex)
c) BLG-02(D-SUB25Pconcave-D-SUB25Pconvex)
23