SANEI ELECTRIC Printy 3 BL-80RS II Instruction Manual page 18

The shaded section denotes the setting at the time of shipment.
How to operate: Pressing the FEED switch takes you to the next item.
Pressing the SELECT switch allows you to change the functions.
◇Setting the international characters
International char = Japan
International char = U.S.A
International char = Germany
International char = England
International char = France
International char = Spain
International char = Italy
International char = Sweden
◇Setting the character and inter-line space
Print mode = Graphic
Print mode = Character
◇Setting the character set
= 24-dot ANK Gothic type ：24-dot method, Gothic style
Character set
Character set = 24-dot ANK Ming type
= 16-dot ANK Gothic type ：16-dot method, Gothic type
Character set
Character set = 16-dot ANK Ming type
◇Use of SELECT switch
Select switch = Available(ON)
Select switch = Invalidity
◇Setting the RS232C baud rate
Baud rate = 9600bps
Baud rate = 19200bps
Baud rate = 4800bps
Baud rate = 38400bps
◇Setting the RS232C data bit length
Bit length = 8 bits
Bit length = 7 bits
◇Setting the RS232C parity
Parity = Non
Parity = Odd
Parity = Even
◇Setting the RS232C control method
Data control = SBUSY
Data control = Xon/Xoff
：Japanese
：American English
：German
：British English
：French
：Spanish
：Italian
：Swedish
：Character and inter-line space setting
(interval: 0 dot)
：Character and inter-line space setting
(Interval: 2 dots)
：24-dot method, Ming type
：16-dot method, Ming type
：The SELECT switch is used.
：The SELECT switch is not used.
：RS232C baud rate 9600 baud
：RS232C baud rate 19200 baud
：RS232C baud rate 4800 baud
：RS232C baud rate 38400 baud
：RS232C data bit length 8 bits
：RS232C data bit length 7 bits
：RS232C No parity
：RS232C Odd parity
：RS232C Even parity
：SBUSY
：Xon/Xoff
15