Using Canon Printer Agent Creator In Manual Mode - Canon NDPS Gateway User Manual

Using Canon Printer Agent Creator in Manual Mode

To use Canon Printer Agent Creator in Manual mode, do the following procedure.
1
On the NetWare server console, enter the following command, and press the Enter key.
load canpautl
The [Mode Selection] menu appears.
2
Select [Manual Mode], and then press the Enter key.
[Manual Mode Main Menu] appears.
NOTE
• You can also display [Manual Mode Main Menu] by
typing the following command on the Netware
server console in step 1.
load canpautl manual
3
Select [Execute], and then press the Enter key.
The [Execute] menu appears.
2-14 Using Canon Printer Agent Creator