Table of Contents
Advertisement
Configuring Canon NDPS Gateway
After installing Canon NDPS Gateway, configure it to operate a Canon printer in NDPS architecture
according to the procedures below.
Before configuring Canon NDPS Gateway, you must create an NDPS Manager using NetWare
Administrator, load NDPSM.NLM at the server console, and then determine whether you use a con-
trolled access printer or a public access printer.
Creating NDPS Manager and Loading NDPSM.NLM
IMPORTANT
• If you have already created the NDPS Manager and loaded NDPSM.NLM, this procedure is not required.
• The procedure below may differ, depending on the NetWare version and the network environment. It is
recommended that you also refer to the NetWare instructions.
1
Start NetWare Administrator, and then select
the object where you want to create an NDPS
Manager.
2
From the [Object] menu, select [Create...].
The [New Object] dialog box appears.
3
Select [NDPS Manager], and then click [OK].
The [Create NDPS Manager Object] dialog box appears.
4
In [NDPS Manager Name], enter an NDPS Manager name of your choice.
5
Select the [Resident Server] and [Database Volume] by clicking the button on the right.
Configuring Canon NDPS Gateway
2-3
Advertisement
Table of Contents
