Back Panel; Mains Fuse; Safety Notes - 3rd Power Dream 40 American User Manual

Back Panel:

10000
4 OHM
24 23 22
AC Input (22)
The AC INPUT socket (TYPE IEC Grounded) is a required connection for operating the unit at 120V
(standard USA household electrical power).

Mains Fuse (23)

The MAINS FUSE requires a 2 AMP fast-acting fuse. This fuse protects your amplifier from voltage
peaks from your power outlet.
H.T. Fuse (24)
The H.T. FUSE requires a .3 AMP (300 milliamp) slow-blow fuse. The H.T. FUSE usually blows if your
power tubes are bad to protect the circuit from being damaged.

SAFETY NOTES:

• Always plug your amp into a properly grounded 3 prong AC outlet.
• Never plug your amp into an ungrounded outlet.
• Never remove or break off the 3rd prong safety ground pin from the power cord.
• Never use a damaged or ungrounded power cord.
• Always use the proper value and type fuse according to the rear-panel markings.
• Never attempt to replace the fuse while the amplifier is still plugged into the power source. The
fuse should only be replaced when the power cord has been disconnected from its power source.
9