3rd Power Dream 40 American User Manual page 6

Front Panel: AC Channel
MID CONTOUR
TOP CUT VOICING VOLUME
AC
NORMAL
BRILLIANCE
TOP BOOST 1
TOP BOOST 2
INPUT
10 9 8 7 6
Input Jack (6)
The INPUT jack is where you connect instrument level signals.
Volume Control (7)
The VOLUME control allows you to adjust the signal level as well as the temperament and overall
character of your instrument's sound. The AC channel has been designed to deliver a comprehensive
AC sonic experience.
Channel Voicing Switch (8)
The CHANNEL VOICING switch allows you to adjust the operating modes of your AC channel.
• NORMAL: Wide, full range of frequencies.
• BRILLIANCE: Adds high frequency emphasis on top of the full range response of NORMAL mode.
• TOP BOOST 1: Gentle roll-off of low and low mid frequencies with extended upper mid-range.
• TOP BOOST 2: Dramatic roll-off of low and low mid frequencies with even greater emphasis of
upper mid-range and high frequencies.
Mid Contour Switch(9)
The MID CONTOUR switch allows you to toggle between two mid-range frequency response curves.
In the down position, you'll hear the classic early 60's AC tone stack with it's chimey mid-scoop con-
tour. In the UP position, you'll hear a modern "post 2000" mid forward contour.
Top Cut Control (10)
The TOP CUT control allows you to adjust the tonal emphasis of your high frequencies.
6