You can modify the values as you want, and then click the button Apply to store them back into
device.
The same as others, you can find more in the user manual of OBD PCTool.
5.4 Device Installation
Stop and turn off the engine and insert the G-Mouse into the G-Mouse Connector.
Light up and flat on the vehicle. Ensure that there is no block of metal and other items. At the end,
please connect the device to the OBD diagnostic connector firmly.
5.5 Diagnostic Link Connector
Vehicle equipped with OBD system has an DLC on board according to the specification
of J1962. Shown as below:
Pin
Description
1
Vendor Option
2
SAE J1850 Bus+
Pin
Description
9
Vendor Option
10
SAE J1850 Bus-