Table of Contents
Advertisement
1) OBD Connector
It is used to connect with the on-board Diagnostic Link Connector.
The OBD system communicates with external device under the same protocol through this
connector.
2) G-Mouse/Data Interface
This is a multifunction interface. Device connects to PC by USB Data Cable through this connector
when modify the parameters of the device. In normal, this interface can be accessed by G-Mouse
accessories.
3) SIM Card Interface
This is used for inserting the SIM card.
4) Status Indicator
Indicator
Color
Power LED
Red
GSM LED
Orange red
Green
OBD LED
yellow
G-Mouse LED
Green
3.2 Technical Parameters
Working voltage
Locate mode
Location accuracy
Locate speed
accuracy
Transmission
GSM band
Dimension
4.
Functions
4.1 Protocols
This product supports all the OBD II standards below:
J1850-PWM
J1850-VPW
ISO 9141-2
Status
Permanently on - Power on
Slow blinking (on:0.3s, off:2.7s) - Registered full service
Fast blinking (on:0.5s, off:0.5s) - Network searching/Not
registered
Permanently off - Module off
Blinking - Device try to communicate with vehicle
Permanently on - Device communicate with vehicle
Blinking - GPS signal is good
Permanently on - Searching the GPS signal
9~16V DC
GPS
≤15m
≤0.1m/s
GPRS/SMS
850/900/
1800/1900MHz
55*50*28mm
(L*W*H)
Normal current
<150 mA@13.8V
Sleep current
<35mA@12.0V
Max current
<200mA@13.8V
-30℃～+70℃
Working temp
-40℃～+85℃
Storage temp
5%～95%no frost
Relative humidity
Protection class
IP30
Advertisement
Table of Contents
