Gps; Real-Time Monitoring; Vehicle S Location; Abnormal Alert - Kocchi's IDD-212G User Manual

ISO 14230-4 (KWP2000)

ISO15765-4(CAN)


4.2 GPS

This product has a GPS satellite signal receiver for enabling global positioning.

4.3 Real-time Monitoring

This product can keep contact with control center through GSM features for enabling real-time
monitoring.
4.4 Vehicle's Location
User can visit our tracking platform to check vehicle's position.

4.5 Abnormal Alert

When the following conditions beyond the pre-defined value, the device will send out an extension
alarm to the control center and accompanied with "beep-beep-beep...".
The conditions including:
High RPM

High Speed

Low Battery Voltage

High Coolant Temperature

Quick Speed-up

Quick Slow-down

Parking long time without ignition off

Towed

Note: For details, please see this handbook – Installation | Parameter Setting.

4.6 Mileage of Trip

At the end of the trip, device will report the driving mileage to the control center.

4.7 Fuel Consumption of Trip

At the end of the trip, device will report the fuel consumption to the control center.

4.8 Remote Maintenance

The parameters of device can be modified through our website

4.9 Diagnostic Functions

Upon user's request, this product can read/erase diagnostic trouble codes, reset the MIL, and many
live data.
All of the information can be analyzed by the control center, and immediately display to the user
with provision of maintenance recommendations to prevent the extension damages and costs.
5.

Installation

5.1 Account Registration