Table of Contents
Advertisement
CD-MPX870W
3.2. How to Remove the tray motor/main cam
motor/5-Changer Motor PWB (See Fig. 1)
1. Remove the screws (A1) x 2 pcs., to remove tray
motor/main cam motor/5-Changer Motor PWB.
Changer Mechanism Unit
Main Cam Motor
NOTE:There are 2 more screws tighten the motors at
the bottom of main chassis. Before performing
procedure 1 above, disc stop spring, top plate
sear up down board and trays must be
removed, then only the 2 screws can be
untighten.
Tray Motor
5-Changer
Motor PWB
(A1)X2
φ2x10mm
Figure 1
3 – 6
Advertisement
Table of Contents
